IEI Technology IOWA-GX Скачать руководство пользователя страница 146

Страница: 146 / 212

IOWA-GX CPU Board

Page 128

CAUTION!

Do not accidentally disconnect the SATA drive cables. Carefully route

the cables within the chassis to avoid system down time.

7.2 Features and Benefits

Supports RAID levels 0, 1, and JBOD

Supports connectivity to two disk drives

Supported Operating Systems include: Windows 98/Me, Windows 2000 and

Windows XP

Windows-based software for RAID management

7.3 Accessing the ALi RAID Utility

To access the

Ali RAID Utility

, please follow the steps below:

Step 1:

Connect SATA drives to the system

. Connect two SATA drives to the system.

Make sure the drives have the same capacity, are the same type and have the

same speed.

NOTE

Make sure the SATA drives are EXACTLY the same when they are

configured in a RAID configuration (JBOD, RAID 0 or RAID 1). If they

are not the same size, disk drive capacity is sacrificed and overall

performance affected.

Step 2:

Enable SATA drives in BIOS

. Start the computer and access the

AMI BIOS

setup program. Next, open the

Advanced CMOS Setup

menu. Enable the

SATA ROM Support BIOS

option.

Содержание IOWA-GX





















































































































































































































Результаты поиска

Содержание IOWA-GX

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology IOWA-GX, Руководство пользователя

Результаты поиска

Содержание IOWA-GX

Отзывы:

Бренды по названию

Популярные бренды