IEI Technology IBX-660 series, Руководство пользователя

Страница: 24 / 62

IBX-660 Industrial Edge Storage Server
Page 16
Step 2: Slide the memory module to the slot at a 45-degree angle (approximately) and
press the memory module down until it clips into place. Ensure the memory
module sits properly with the clips in place.
Figure 3-2: SO-DIMM Installation
NOTE:
Always ensure that a memory module is installed in the primary slot
that is on the top (marked with “DIMM1”). If not, then the system will fail
to start. When installing two memory modules, please ensure that they
are the same size and ideally use the same type/model for both slots.