IEI Technology IBX-660 series, Руководство пользователя

Страница: 18 / 62

IBX-660 Industrial Edge Storage Server
Page 10
2.1 Unpacking
To unpack the IBX-660, follow the steps below:
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the system out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Make sure all the components listed in the packing list are present.
2.2 Packing List
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
IBX-660 was purchased from or contact an IEI sales representative
directly by sending an email to sales@ieiworld.com .
The IBX-660 is shipped with the following components:
Quantity Item Image
1 IBX-660 industrial edge storage
server