IEI Technology EP-265-GM45, Руководство пользователя

Страница: 54 / 139

E-265-GM45/EP-267-GM45 Enrich POS System
Page 42
The CF Voltage Select jumper location is shown in
Figure 4-11
.
Figure 4-11: CF Voltage Select Jumper Location
4.8.5 Clear CMOS Jumper
Jumper Label: CLR_CMOS1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-5
Jumper Location:
See
Figure 4-12
If the EP-265-GM45/EP-267-GM45 fails to boot due to improper BIOS settings, the clear
CMOS jumper clears the CMOS data and resets the system BIOS information. To do this,
use the jumper cap to close the pins for a few seconds then remove the jumper clip.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults