IEI Technology EP-265-GM45, Руководство пользователя

Страница: 40 / 139

E-265-GM45/EP-267-GM45 Enrich POS System
Page 28
3.1 Unpacking
To unpack the flat POS system, follow the steps below:
WARNING!
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the POS system has been
properly installed. This ensures the screen is protected during the
installation process.
Step 1:
Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2:
Open the external (second) box.
Step 3:
Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4:
Lift the monitor out of the boxes.
Step 5:
Remove both polystyrene ends, one from each side.
Step 6:
Pull the plastic cover off the POS system.
Step 7:
Make sure all the components listed in the packing list are present.
Step 0: