IEI Technology Enano-8523T Скачать руководство пользователя страница 98

Страница: 98 / 164

-98

Quiet Boot [Disabled]

The

Quiet Boot

BIOS option allows the boot up screen options to be modified between

POST messages or an OEM logo.

Disabled

(Default)

Displays normal POST messages

Enabled

Displays OEM Logo instead of POST messages

Bootup Num-Lock [Off]

The

Bootup Num-Lock

BIOS option allows the Number Lock setting to be modified during

boot up.

Off

(Default)

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on the

right side of the keyboard. To confirm this, the Number Lock

LED light on the keyboard is lit.

PS/2 Mouse Support [Enabled]

The

PS/2 Mouse Support

BIOS option allows

the PS/2 mouse support to be adjusted.

Disabled

Disables PS/2 mouse support and prevents the PS/2

mouse port from using system resources.

Enabled

Allows the system to use a PS/2 mouse.

IEI

Technology, Corp

Содержание Enano-8523T





































































































































































Результаты поиска

Содержание Enano-8523T

Отзывы:

Похожие инструкции для Enano-8523T

Бренды по названию

Популярные бренды

IEI Technology Enano-8523T, Руководство пользователя

Результаты поиска

Содержание Enano-8523T

Отзывы:

Похожие инструкции для Enano-8523T

Бренды по названию

Популярные бренды