IEI Technology ECN-780-Q67 Скачать руководство пользователя страница 146

Страница: 146 / 184

ECN-780-Q67 Em b e d d e d S ys te m

P a g e 133

NOTE:

Use the following commands to check if the partitions were created

successfully.

S te p 6:

Press any key to exit the recovery tool and automatically reboot the system.

Please continue to the following procedure: Build the Recovery Partition.

Step

C.2.3

In s ta ll Op e ra tin g S ys te m , Drive rs a n d Ap p lic a tio n s

Install the operating system onto the unlabelled partition. The partition labeled "Recovery"

is for use by the system recovery tool and should not be used for installing the operating

system or any applications.

NOTE:

The operating system installation program may offer to reformat the

chosen partition. DO NOT format the partition again. The partition has

already been formatted and is ready for installing the new operating

system.

To install the operating system, insert the operating system installation CD into the optical

drive. Restart the computer and follow the installation instructions.

Содержание ECN-780-Q67

























































































































































































Результаты поиска

Содержание ECN-780-Q67

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology ECN-780-Q67, Руководство пользователя

Результаты поиска

Содержание ECN-780-Q67

Отзывы:

Бренды по названию

Популярные бренды