IEI Technology ECN-380-QM87, Руководство пользователя

Страница: 22 / 84

ECN-380-QM87 Em b e d d e d S ys te m
P a g e 14
3.1 In s ta lla tio n P re c a u tio n s
During installation, be aware of the precautions below:

Read the user manual : The user manual provides a complete description of
the ECN-380-QM87, installation instructions and configuration options.

DANGER! Disconnect Power : Power to the ECN-380-QM87 must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the ECN-380-QM87 is opened while the power cord is still
connected to an electrical outlet.

Qualified Personnel : The ECN-380-QM87 must be installed and operated
only by trained and qualified personnel. Maintenance, upgrades, or repairs
may only be carried out by qualified personnel who are familiar with the
associated dangers.

Air Circulation : Make sure there is sufficient air circulation when installing the
ECN-380-QM87. The ECN-380-QM87’s cooling vents must not be obstructed
by any objects. Blocking the vents can cause overheating of the
ECN-380-QM87. Leave at least 5 cm of clearance around the
ECN-380-QM87 to prevent overheating.

Grounding : The ECN-380-QM87 should be properly grounded. The voltage
feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the ECN-380-QM87.
3.2 Ha rd Dis k Drive (HDD) In s ta lla tio n
To install the hard drive to the removable HDD bay, please follow the steps below:
S te p 1: Remove two HDD cover retention screws from the rear panel.