IEI Technology ECN-380-QM87, Руководство пользователя

Страница: 31 / 84

ECN-380-QM87 Em b e d d e d S ys te m
P a g e 23
S te p 1:
Locate the RJ-45 connectors . The location of the LAN connector is shown in
Chapter 1 .
S te p 2:
Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the ECN-380-QM87. See Figure 3-11.
Figure 3-11: LAN Connection
S te p 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the RJ-45 connector. S te p 0:
3.6.4 DB-9 S e ria l P o rt Co n n e c tio n
There are two RS-232 DB-9 connectors of the ECN-380-QM87 for serial device
connection. Follow the steps below to connect a serial device to the DB-9 connector of the
ECN-380-QM87.
S te p 1:
Locate the DB-9 connector . The locations of the DB-9 connectors are shown
in Chapter 1 .
S te p 2: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the rear panel. See Figure 3-12.