IEI Technology ECK-3692, Руководство пользователя

Страница: 58 / 170

ECK-3692G Embedded System
Page 42
YPbPr devices can be connected to the system.
The cable connection locations are shown in
Figure 2-3
.
4.3 Power-On Procedure
4.3.1 Installation Checklist
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the embedded system please make sure of the following:
The memory module is installed
The wireless LAN module is installed
The top cover is installed
All peripheral devices (monitor, serial communications devices etc.) are
connected
The power cables are plugged in
4.3.2 Power-on Procedure
To power-on the ECK-3692G please follow the steps below:
Step 1:
Turn on the power button (
Figure 4-7
).
Step 2:
Once turned on, the blue power LED on the power button should be turned on.
Step 0: