IEI Technology ECK-3692, Руководство пользователя

Страница: 47 / 170

ECK-3692G Embedded System
Page 31
The PWI-9451 motherboard has one onboard jumper (
Table 3-8
).
Description Label Type
Clear CMOS J3 3-pin header
Table 3-8: Jumpers
3.8.1 Clear CMOS Jumper
Jumper Label: J3
Jumper Type:
3-pin header
Jumper Settings:
See
Table 3-9
Jumper Location:
See
Figure 3-8
If the ECK-3692G fails to boot due to improper BIOS settings, the clear CMOS jumper
clears the CMOS data and resets the system BIOS information. To do this, use the jumper
cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1
and 2.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in
Table 3-9
.