IEI Technology A200C-800Z-R10 Скачать руководство пользователя страница 83

Страница: 83 / 177

-83

A200C-800Z-R10 Motherboard

motherboard.

Step 2:

Connect the other end of the same ribbon cable in Step 1 to the IDE1 connector

on the expansion daughterboard.

Step 0:

4.4 Chassis

Installation

After the DIMM modules have been installed and after the internal peripheral connectors

have been connected to the peripheral devices and the jumpers have been configured,

the A200 can be mounted into chassis.

To mount a board into a chassis, please refer to the chassis user guide that came with the

product.

4.5 Rear Panel Connectors

4.5.1 LCD Panel Connection

The conventional CRT monitor connector, VGA1, is a 15-pin, female D-SUB connector.

It can be connected to an external monitor.

4.5.2 Ethernet Connection

The rear panel RJ-45 connectors can be connected to an external LAN and communicate

with data transfer rates up to 100M/s.

4.5.3 USB Connection

The rear panel USB connectors provide easier and quicker access to external USB

devices. The rear panel USB connector is a standard connector and can easily be

connected to other USB devices.

Содержание A200C-800Z-R10


















































































































































































Результаты поиска

Содержание A200C-800Z-R10

Отзывы:

IEI Technology A200C-800Z-R10, Руководство пользователя, Страница: 83 / 177

Результаты поиска

Содержание A200C-800Z-R10

Отзывы: