IEI Technology A200C-800Z-R10 Скачать руководство пользователя страница 78

Страница: 78 / 177

-78

CKY-6614 WSB- Card

IEI

Technology, Corp

4.1 Installation

Considerations

NOTE:

The following installation notices and installation considerations should be

read and understood before the CPU card is installed. All installation

notices pertaining to the installation of the CPU card should be strictly

adhered to. Failing to adhere to these precautions may lead to severe

damage of the CPU card and injury to the person installing the CPU card.

4.1.1 Installation Notices

Before and during the installation of the A200 motherboard, please

the following:

Read the user manual

The user manual provides a complete description of the A200

motherboard, installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD)

Electronic components are easily damaged by ESD. Wearing an ESD cuff

will remove ESD from your body and help to prevent ESD damage.

Place the CPU Card on an antistatic pad

When you install or configure the CPU Card, place it on an antistatic pad.

This will help to prevent potential ESD damage.

Turn off all power to the A200 motherboard

When working with the CPU card, make sure that it is disconnected from

all power supplies and that no electricity is being fed into the system.

Before and during the installation of the A200 motherboard

DO NOT:

remove any of the stickers on the PCB board. These stickers are required for

warranty validation.

use the product before you have verified that all cables and power connectors

Содержание A200C-800Z-R10


















































































































































































Результаты поиска

Содержание A200C-800Z-R10

Отзывы:

IEI Technology A200C-800Z-R10, Руководство пользователя, Страница: 78 / 177

Результаты поиска

Содержание A200C-800Z-R10

Отзывы: