IEI Technology A200C-800Z-R10 Скачать руководство пользователя страница 27

Страница: 27 / 177

-27

A200C-800Z-R10 Motherboard

quality and full surround-sound capability.

LAN Connect Interface (LCI) provides flexible network solutions such as

10/100 Mbps Ethernet and 10/100 Mbps Ethernet with LAN manageability

Dual Ultra ATA/100 controllers, coupled with the Intel® Application Accelerator

supports faster IDE transfers to storage devices

Intel Application Accelerator software provides additional performance over

native ATA drivers by improving I/O transfer rates and enabling faster O/S

load time, resulting in accelerated boot times

2.2.3 Intel® ICH4 Southbridge Chipset

The ICH4 provides extensive I/O support. Functions and capabilities include:

PCI Local Bus Specification, Revision 2.2-compliant with support for 33 MHz

PCI operations.

PCI slots (supports up to 6 Req/Gnt pairs)

ACPI Power Management Logic Support

Enhanced DMA controller, Interrupt controller, and timer functions

Integrated IDE controller supports Ultra ATA100/66/33

USB host interface with support for six USB ports; three UHCI host controllers;

one EHCI high-speed

USB 2.0 Host controller

Integrated LAN controller

System Management Bus (SMBus) Specification, Version 2.0 with additional

support for I

C devices

Supports Audio Codec ’97, Revision 2.3 specification (a.k.a., AC ’97

Component Specification, Revision 2.3)

Link for Audio and Telephony codecs (up to seven channels)

Low Pin Count (LPC) interface

Firmware Hub (FWH) interface support

Alert On LAN* (AOL) and Alert On LAN 2* (AOL2)

2.3 Data

Flow

Figure 2-1

shows the data flow between the two onboard chipsets and other components

installed on the motherboard and described in the following sections of this chapter.

Содержание A200C-800Z-R10


















































































































































































Результаты поиска

Содержание A200C-800Z-R10

Отзывы:

IEI Technology A200C-800Z-R10, Руководство пользователя, Страница: 27 / 177

Результаты поиска

Содержание A200C-800Z-R10

Отзывы: