5.6 Wiring an Accessory Relay Board
(242eM only)
The accessory relay board contains physical outputs 2, 3, and 4
shown in the table below.
Physical Output
Relay
Connector
2
K2
P1
3
K3
P2
4
K4
P3
Use the wire harnesses supplied with the relay board to connect to
the relays. The wire colors are shown in the table below.
Wire Color
Relay Connection
Gray
Normally Closed
Blue
Common
Green
Normally Open
5.7 Wiring an Integrated Access Control
System Using the Accessory Relay Board
Physical outputs 2, 3, and 4 are
defaulted
to the alarm shunt,
propped door, and forced door virtual outputs, respectively. Use the
following steps to wire the alarm shunt, propped door alarm, and
forced door alarm.
Figure 9 Wiring an Accessory Relay Board
IEI 212eM/242eM Standalone Installation/Programming Manual
12
Document # 6174000, Rev. 1.1
