Module 68
Operating instructions
7 - 38
IEF-Werner GmbH | Wendelhofstraße 6 | DE-78120 Furtwangen | www.ief-werner.de
Er
st
el
lt v
on
: F
ran
k R
ei
ch
el
t
|
MA
N
_E
N
_1040579_
Mo
d
ul
e 68_
R
2f
.d
oc
1
Declaration of incorporation
EC declaration of incorporation in the sense of the EC directive 2006/42/EC (machinery), Annex II B
The manufacturer:
IEF-Werner GmbH
Wendelhofstraße 6
78120 Furtwangen – Germany
hereby declares that the following products (the incomplete machine/component):
Designation
IEF-Werner parts group number
Module 68
TG1000018
where possible based on the scope of delivery, correspond to the following basic requirements of
the directive on Machinery (2006/42/EC):
Annex I, item: 1.1.2; 1.1.3; 1.1.5; 1.3.2; 1.3.4; 1.5.1; 1.7.3; 1.7.4;
The incomplete machine also corresponds to the following further directives:
■
Directive 2014/30/EU of the council, dated 15 December 2004, for harmonisation of the legal
provisions of the member states on electromagnetic compatibility.
■
Directive 2014/35/EU of the council, dated 12 December 2006, for harmonisation of the
legislation of the member states regarding electrical equipment for use within specified voltage
thresholds.
The technical documents were generated according to Annex VII part B and may be electronically
submitted to the national authorities upon justified request.
List of some applied harmonised standards:
■
EN ISO 12100-1,-2 / EN ISO 13857 / EN ISO 13850 / EN 60201-1
Commissioning of the incomplete machine (component/device) delivered by us is not permitted
until it has been determined that the overall system into which the component is installed meets
the basic safety and health protection requirements according to Annex I of the above EC directive
2006/42/EC.
Name and address of the documentation officer: IEF-Werner GmbH
Furtwangen, May 2019 Stefan Deck (Manager)
