iDTRONIC BLUEBOX Panel Reader LF, Руководство пользователя

Страница: 15 / 36

BLUEBOX Panel Reader Page 15 of 36
Parameter Description Range Default
Note that this parameter become effective
only after a reboot of the reader.
Reverse Byte
Order
Reverse byte order of the spontaneous message
content data.
Note that this setting different from default
value overrides the USB HID keyboard emulation
message content data encoding setting.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Disabled
Nibble Bit
Reverse
Nibble bit reverse of the spontaneous message
content data.
Note that this setting different from default
value overrides the USB HID keyboard emulation
message content data encoding setting.
Note that this parameter become effective
only after a reboot of the reader.
Disabled
Enabled
Disabled
The ‘spontaneous’ message parameters are stored in configuration page nr.
0x09 and are managed through the ‘Read RAM/ROM Configuration Parameters’
and ‘Write RAM/ROM Configuration Parameters’ commands as described in
protocol technical manuals where the parameters 1…7 fields with default values
are:
1 2 3 4 5 6 7
0x00 Interface
Packet
Format
Content
Data
Encoding
Content
Data
Manipulation
0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00
Where:
Parameter Description
Interface
The interface where to send the ‘spontaneous’ message activation/deactivation. Single
bits are dedicated to enable (0 value) or disable (1 value) an interface:
Bit Description
Bit 7 Not used
Bit 6 Not used
Bit 5 Not Used
Bit 4 Not Used
Bit 3 Not Used