IDTECK Star 100R, Руководство пользователя

Страница: 29 / 40

29
● Problem
User card or PIN cannot be deleted.
● Cause
▶
An error in using a product or in system settings
▶
System malfunction/data damaged or lost due to an external noise or a short circuit.
● Solution
▶
Make sure that installation and operation are normal.
☞
When the product operates normally
- Having a master card or PIN
1. Having a user card that wish to delete
a. Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
b. Enter “mode 14 + ENT” to delete user access cards.
c. Enter a user card to delete. If there have enough user cards that wish to delete,
enter them in order continuously.
d. Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
2. Loosing a user card that wish to delete (But knowing PIN of user card)
a. Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
b. Enter “mode 73 + ENT” to “Enable Keypad Input To Enter ID Number”.
c.
Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
d. Enter “4 + ENT” to delete user access cards.
e. Enter “PIN + ENT”. If there have enough user cards that wish to delete, enter
them in order continuously.
f.
Enter the master card (or PIN: 4 to 6digit (mode 03 or 05) + ENT).
- Loosing a master card or PIN
1. When loosing a master card, this cannot register/delete a user and use setting
changes.
2. Initialize the product
#1)
.
● If the problem still persists, contact our customer service center.
[System
[System Initialization]
#1)
System Initialization: See page 24 of this manual.
#2)
Initial Setting: See page 10 of this manual.
#3)
Setting Changes: See page 14 of this manual.
See “Setting Changes
#3)
” to delete master or user.
Caution
See “Initial Setting
#2)
” to register master or user. Caution
Upon initialization, all data default value will be restored.
Caution