IDTECK LX006, Руководство пользователя

Страница: 53 / 57

p.48 Errors keep occuring when registering a fingerprint.
ddress set in the device.
2. When you use several devices together, communication addresses set in the devices sh
ould be different from each other.
3. Check if baud rate is same with baud rate set in a software.
* If you initialize the device, baud rate is set to 57,600 bps which is the default.
4.3 Please check if the communication port setting is good.
Check if communication port set in software is same with communication port set in PC.
If the problem persists, please contact service center.
5 I want to access with card only, without fingerprint.
5.1 If you registered a fingerprint, newly registered the ID without fingerprint..
See [Operation mode] > [Registration/deletion mode] > [User card registration] of the manu
al and register an ID without fingerprint.
If the problem persists, please contact service center.
6 Errors keep occuring when registering a fingerprint.
6.1 Check if the status of the fingerprint is good.
If something had been attached to fingerprint or fingerprint had had a scar when you regist
ered, fingerprint recognition may not work properly. Remove it.
6.2 Place your fingerprint on the right position of the fingerprint scanner.
If not, fingerprint recognition may not work properly