22
12.1.2
12.1.3
12.1.4
COMMUNICATION ID (ADDRESS) DISPLAY
☞
. This is communication ID setting menu.
To change the communication ID, press
<ENT>
key.
COMM ID SETTING
☞
. When the cursor is blinking, enter a new ID (Three Digit
number) and the setting is completed.
Possible ID is between 000 ~ 255 inclusive.
☞
. The number on the LCD is the current communication ID
(Device No.) Please press
<ENT>
key again to set a new
communication ID.
COMM ADDRESS
000
COMM ADDRESS
001
BAUD RATE SETTING
☞
. The
RFK505
supports 4800/9600/19200 of baud rate
and the default setting is 9600bps.
Wrong baud rate setting will cause communication
errors, and setting baud rate of
RFK505
and host
PC should be same. If any communication problem,
please check as below;
- Check COMM ID of
RFK505
and host PC
- Check BAUD RATE of
RFK505
and host PC
- Check communication port and cable
- Check COM port setup of host PC
Parity: None, Data Bit: 8 bit, Stop Bit: 1 bit
To change the baud rate, press
<ENT>
key and select
desired baud rate by pressing
<4>
or
<6>
key then
press
<ENT>
key.
BAUD RATE
9600
--> 9600
BAUD RATE
--> 19200
BAUD RATE
MASTER ID CHANGE
MASTER ID CHANGE
☞
. Press
<ENT>
key to change the current Master ID. The user
should use the new Master ID to access the SETUP MENU
after changing the Master ID.
Default Master ID/PASSWORD
RFK505 / IPK505
: “00000000”/”3141”
SRK505
: “0000000000”/”3141”
CARD & Key Use
1-Card, 2-Key Use
Scanning …
☞
. The
RFK505
is waiting for an RF card that is to be
registered. The card number will appear with a beep as
the card is read.
Содержание iPASS IPK505
Страница 1: ...User s Manual PIN Proximity Card Reader ...
Страница 31: ...31 16 Template ...
