IDTECK iPASS IPK505, Руководство пользователя, Страница: 16 / 32

16
9
9
.3 DIAL UP MODEM
Please, see the Software manual.
.4 TCP/IP CONVERTER (EXTERNAL VERSION)
Please, see the Software manual.
10. Basic Settings
POWER ON
SYS. INITIALIZE ?
If you turn on the system power
after connected 3 wires (pink, cyan
and black(GND)), you can enter
system initialize mode.
H/W RESET MODE
WAIT INITIIAL MASTER P/W
("3141")
RIGHT ?
SYSTEM INITIALIZE
YES
YES
NO
NO
WAITING REBOOT
INITIAL BEEP( - - - -)
SYSTEM READY
GENERAL BOOT
In the system ready, LCD
display model name,
ID INPUT ?
YES
MASTER ID ? YES
ENTER SETUP MENU
END SETTING ?
YES
NO
SETTINGIN SETUP MODE
INITIALIZE BEEP( - - -)
NO
OUTPUT CONTROL OF EACH
STATUS
10.1 INITIALIZATION OF RFK505
Before installation of the system and when it is not able to enter the setup menu (system
error or something wrong), the user has to Hardware initialize.
The user has to initialize H/W using an external reader port.
Turn off the system power and connect 3 wires (pink, cyan and black (GND)), and turn on
the system power. (
Ref. 8.2 SYSTEM INITIALIZATION ). Initializing will erase all stored data
incl. registered IDs data. Then, the user has to do setting the system parameter. Before the
first installation, the user must Hardware initialize.