IDTECK iMDC-MAIN, Руководство пользователя

Страница: 50 / 79

NETWORK SETTING p.44
Column Name Description
RIM Name Insert iMDC-RIM board name. RIM Name should not be duplicated.
RIM Address Insert iMDC-RIM board address. RIM Address should not be duplicated wit
h the other RIM boards registered in the same iMDC.
RIM IP Address Insert IP address for iMDC-RIM Board.
Sub-net Mask Insert Sub-net mask address for iMDC-RIM Board.
Gateway Insert Gateway address for iMDC-RIM Board.
DNS Server Address Insert DNS server address for iMDC-RIM Board.
iMDC IP Address Insert iMDC-MAIN IP address that connects to iMDC-RIM Board. IP address
which was registered during drag and drop stage will be set as default valu
e.
iMDC Port Insert port number to connect iMDC-RIM Board and iMDC-MAIN. Default i
s 6005.
2. After each iMDC-RIM setting is completed, check all of settings in the first column. Clic
k ‘RIM Network Setting’ button to link up with iMDC-RIM board and then click the ‘Next
’ button.
3. The step for Biometric Setting. In this step you can only search LX006 and LX006SR fing
erprint reader. If you need to set other fingerprint device you need to go Loop and Devi
ce setting and set manually. Press to ‘Auto Search LX006/SR’ button. All connected LX0
06/SR reader is found on same network as above figure. Select LX006/SRto register the
n, move to down by Drag and Drop to one of registered LX Biometric Type(LX006/SR).
Set network information for each LX006/SR reader. After set network information chec
k to all setting on first column. Press to ‘LX006/SR Network Setting’ button to send the i
nformation to LX006/SR then, move to next step by ‘Next’ button.