IDTECK 100RV, Руководство пользователя

Страница: 23 / 65

p.18
Reader mode setup
100RV
2 Reader mode setup (RF + P/W)
No Master Card or Master PIN is ever registered.
If you remember the Master Card or the Master PIN was registered, initialize the product
and try again.
1. When you turn on the product, all of the 3 LED indicators will flash with a beep.
• No flashing of the 3 indicators denotes that the reader mode is already specified.
2. Press Button and Button in sequence and press .
3. Present a card that you want to register as the Master Card to the device.
When the Master Card is registered, only the red LED indicator flashes.
4. Present a card to the device, enter the 4-6 digit password and press .
If you don’t want to register the cards right now, simply jump to Step 5 above without
through Step 4 above.
5. Present the registered Master Card to the product once again.
6. The device enters Standby mode with only the orange LED indicator flashing.
3 Reader mode setup (PIN only)
No Master Card or Master PIN is ever registered.
If you remember the Master Card or the Master PIN was registered, initialize the product
and try again.
1. When you turn on the product, all of the 3 LED indicators will flash with a beep.
• No flashing of the 3 indicators denotes that the reader mode is already specified.
2. Press Button and Button in sequence and press .
When the mode is specifi ed, only the green LED indicator fl ashes.
3. Enter the 4-6 digit Master PIN number and press .
When the Master PIN is registered, only the red LED indicator flashes.
4. Enter a PIN number to register (4-6 digits) and press .