ID TECH VP7200 User Manual
Page | 20
8.8.
Using the VP7200 to Make a Purchase
8.8.1.
Presenting Cards or NFC Phones
The VP7200 allows for credit/debit card purchases using Contactless (NFC) technology.
Present the card/phone in close proximity to the front portion of the antenna module. Present the
card/phone so that maximum surface area is parallel to the antenna module as shown below.
The antenna should beep, and the four green LEDs should illuminate in sequence, then all will illuminate
together, briefly (750 msec), to indicate a successful test.
This tests the VP7200’s ability to read the Contactless test card. If unsuccessful, there will be no reaction
from the reader. If you use a test card and the VP7200 antenna is attached to the VP7200 Controller, a
dummy transaction can be tested. The transaction will not be authorized and will come back with a
response but will at least test for end-to-end connectivity.
8.8.2.
Making a Purchase
After the transaction has been entered on the kiosk control panel, the customer should present his or
her card/fob/phone in close proximity with the device so that maximum surface area is parallel to the
antenna.
A single beep and all four LEDs briefly flashing indicates the card/fob/phone has been read
correctly.
