VP5300 User Manual
Page | 32
of the new Password 2 in your records.
9.
The device prompts to reenter the password. Enter the new Password 2 again to confirm it.
After entering the new Password 2 for a second time, the device beeps twice to confirm the
input. The SmartPIN L100 or L80 Removal Detection passwords are now set.
10.
The next menu on the L100 or L80 screen has the option to
Enable
. Choose the top option
(scroll up or down using the * and # keys) and press the green
Enter
key. The device displays
an "Activate Success" prompt to indicate success.
9.2.
Setting up the VP5300
To set up the VP5300 for chip-and-PIN operation, you will need to configure the unit to operate in
Configuration 3C. Out of the box, the VP5300 uses the
4C configuration
, which indicates the reader
performs EMV transactions without a PIN pad.
Switching the unit to a 3C configuration can be done easily with ID TECH's free USDK Demo program
on any Windows computer. Download the free demo program from the
dot NET SDK Demo.zip
). No registration is required.
1.
Launch the USDK Demo program and plug the VP5300 into the USB port of your computer. Verify
that the VP5300 is shown as selected on the left side of the window:
2.
Verify that the firmware version of your VP5300 is higher than v72. If the firmware version is
lower, please contact your ID TECH sales rep for more instructions.