VP5300 User Manual
Page | 19
8.
Use the four nuts to secure the NFC Antenna to the surface of the kiosk. Make sure to
tighten the nuts securely so that the antenna does not move freely on the outside
surface of the kiosk.
Note:
Tighten the nuts to 5-7 in/lbs. for a good weather-tight seal.
9.
Attach the end of the cable with the SMB barrel connector through the right 14.0 mm
(0.551 inch) hole and secure it to its socket on the back of the antenna. The SMB
connector pushes onto the socket.
10.
Attach the RJ-45 connector (male) coming from the NFC Antenna to the RJ-45 receptacle
(female) on the 80152236-001 cable
.
