VP5300 User Manual
Page | 31
9.
Pairing with PIN Pad
The VP5300 is designed to be paired with ID TECH's SmartPIN L100 or L80 keypads to
create a full chip- and-PIN solution. Follow the pairing procedures below to use the L100 or
L80 with the VP5300.
First, set up the L100 or L80 for paired operation by specifying two user passwords; then set
up the VP5300; and then, finally, pair the two devices.
9.1.
Setting up the L100 or L80
1.
Cycle the power to the insert reader (unplug the power from the USB cable and plug it back
in).
2.
After plugging the power into the USB cable again, you have only 2 seconds to begin entering
the special pairing command on the keypad (otherwise, you'll need to cycle the power again).
To get into the special menu, press the following keys in this order:
SmartPIN L100
SmartPIN L80
•
Cancel
•
Clear
•
Enter
•
Blank
•
Clear
•
Enter
•
Cancel
•
5
•
Enter
•
0
•
5
•
Enter
3.
The L100 or L80 will start beeping to indicate that the user passwords are not yet set and the
LCD screen will prompt to enter a password.
4.
Enter default Password A:
12345678
. Make sure the device beeps after each button is
pressed to register the input. After correctly entering the default Password A, the device
beeps twice.
5.
Enter a new user-created Password 1 to replace Password A. The new Password 1 must be
eight digits (for example: 11111111). After entering the new Password 1, the device beeps
twice to confirm the input. Make a note of the new Password 1 in your records.
6.
The device will prompt to reenter the password. Enter the new Password 1 again to confirm
it. After entering the new Password 1 a second time, the device beeps twice to confirm
successful verification.
7.
Next, enter default Password B:
87654321
. Make sure the device beeps after each button is
pressed to register the input. After entering the default Password B correctly, the device
beeps twice.
8.
Enter a new user-generated Password 2 to replace Password B. The new Password 2 must
be 8 digits and must be different from Password 1 (for example: 22222222). After entering
the new Password 2, the device beeps twice to confirm successful verification. Make a note
