Resetting the Main Unit Receiver and the Remote Transmitter
To reset both units to default factory settings follow the instructions below:
NOTE
If you are resetting to re-establish a connection between the Remote Transmitter and the Main Unit Receiver, then
the Main Unit Receiver must be reset first.
An added feature of the electrisave™ is a temperature and humidity display function. Both temperature and humidity are
alternately displayed in the bottom left hand corner of the Portable Main Unit for three seconds. Humidity is shown as a %,
and temperature in degrees Celsius
o
C .
An additional feature of the humidity display is a series of icons to indicate if the environment is comfortable, dry or wet:
NOTE
The readings given are for the surrounding environment and may a change according to the position of the unit.
HHH or LLL will be shown if the temperature is over or under range (+50 to –5c).
15
Diagram
Instructions
1. Locate the reset point on the back of the Portable Main Unit.
2. Push a blunt stylus (pen) gently into the reset point.
3. Follow the same steps for the Transmitter.
TEMPERATURE AND HUMIDITY
Zone
Temperature
Relative Humidity
20 – 25 °C
68 - 77 °F
40 – 70%
Any
<40%
Any
<70%
<20°C or > 25°C
40 – 70%
