Setting the cost-per-hour currency unit
NOTE
As the default value is $, the currency unit will need to be changed for a product used in the UK
Setting the cost-per-hour value
Setting the greenhouse gas emission per kW rate (see Greenhouse Gas)
To set the unit and rate of greenhouse gas emissions per electric current production (see
Greenhouse gas
) follow the
instructions below:
NOTE
It may be necessary to change this setting for a product used in the UK where the average greenhouse emission are
approximately 2.2lbs or 1kg per kWh. If a precise rate is required or if you have purchased a “Green Energy” product,
contact your local electricity retailer
Setting the Battery power save mode
You can save battery power by changing the receiving speed of the Main Unit Receiver from every 6 seconds (MAX) to
every minute. To change the setting, follow the instructions below:
12
Diagram
Instructions
1. Press
mode
and
alarm
simultaneously.
2. The currency value blinks. Use the
arrow key
to change the flashing value
(in $, £, or #)
3. Press
mode
to set value.
4. Press
mode
when finished.
Diagram
Instructions
1. Press and hold mode for 2 seconds. The first digit of the electricity cost-per-hour
flashes.
2. Use the
arrow key
to change the flashing value (0-9). Press
mode
to set value.
Repeat for all digits.
3. Press
mode
when finished.
Diagram
Instructions
1. Press mode to change to the Greenhouse Gas display.
2. Press and hold
mode
for 2 seconds.
3. The Greenhouse Gas emission unit blinks. Use the
arrow key
to toggle between units
(Kg/Hour or Ton/Year). Press
mode
to confirm.
4. The Greenhouse Gas value blinks. Use the
arrow key
to change the value.
5.
Press
mode
again to return to the Greenhouse gas display.
