6
REVISION A 09/15/14
82P33714/33814 EVALUATION BOARD
Figure 5. Enter Input and Output Frequencies
To associate an input clock with a sync signal (such as 1PPS, for e)xample, to associate a sync signal IN1 (1PPS) to IN02
(10MHz)), click on the Input Buffer of IN02 (the triangle symbol following frequency entry box), a sub-configuration
window for IN02 is shown below. In the window, IN01 is selected as sync signal.
Figure 6. IN01 is Selected as Sync Signal for IN02 (green oval)
If IN10 is only used as a sync signal for IN09, then disable IN10 to the DPLL as an input in the Input Buffer window of
IN10, as shown in
Figure 7
below.
