IDS IDS806, Руководство пользователя

Страница: 13 / 32

Owner’s Manual
700-624-01C
13
Arming from a Key-switch or Remote Control
There are several option related to this function. Verify with your installer which of the
following have been installed:
1.
Key-switch or Remote Control installed?
2.
Exit Delay with Key-switch or Remote Control?
3.
Toot on Arm/Disarm or Arm LED indicator?
Arming with a key-switch or remote control:
1.
Ensure that the READY icon on the keypad is on before leaving.
2.
Leave and close the door (remembering to lock!).
3.
Twist and release the key-switch or press the remote button.
4.
The alarm will arm immediately and the LED ARM indicator will come on if installed
or the siren will give a single beep if programmed.
OR
5.
If an exit delay has been enabled, the exit delay will begin and arm after the delay
with either an Arm LED or siren toot to indicate arm status.
NOTE:
If a remote control is used, it is advisable to have the siren sound on arm and disarm or a
LED indicator to verify function enabled.
Auto Arming
Your system can be programmed to automatically arm itself daily at a preprogramed
time. Ask your installer to program this function if required. Should the premises be
occupied at the auto arming time, a valid [USER CODE] entered during the 3 minute
arming cycle will cancel the process.
NOTE:
For accurate timing please connect to the HYYP platform via the HYYP GSM module or
HYYP IP module.
Arming with Entry/Exit or Follower Zones Violated
The system can be programmed to arm even if the Entry/Exit or Follower zones are
violated. Check with your installer. Follow the
normal arming procedures i.e. Enter a valid
[USER CODE], but it is not necessary to close the front door.
Forced Arming
If so programmed, the panel can be armed even if there are violated zones. This means
that a monitored window can be left open or other zones can be violated and the panel
will still arm. If the violated zone is then cleared, the panel will resume monitoring the
zone, hence causing an alarm condition or initiation of entry delay, as appropriate, if
violated.