iDRY MINI Скачать руководство пользователя страница 39

Страница: 39 / 43

typographical error or error in pricing, we shall have the right to refuse or cancel any Orders placed for

products or services listed at the incorrect price. We shall have the right to refuse or cancel any such Orders

whether or not the Order has been confirmed and your payment is received or your credit card charged. If your

payment is received or your credit card has already been charged for the purchase and your Order is cancelled,

we will immediately issue a credit or refund check to you or your credit card account in the amount of the

charge.

All trademarks and registered trademarks relating to products and services offered directly by the Company or

available through the Company Site are the sole property of the Company.

6. INSTALLATION, STARTUP, AND TRAINING

Prior to delivery, you will provide proof that all required power, water, air supply and drains for the vacuum

dryer and or ancillary equipment using licensed professionals (ie. locally licensed and insured Plumbers and

Electricians).

Sufficient technical information will be provided with the products to allow proper operation and maintenance

by you. Should you require unusual or special information or support, additional customer service or consulting

costs will be charged. Installation of the primary supply of water, electricity, steam and air are your

responsibility at your expense. Only a licensed plumber and electrician may perform installation work directly

associated with the products manufactured by the Company and ordered by you. During the installation process

the Company will work only with licensed professionals. If any work required for installation of the products

purchased by you is performed by a person that is not licensed in the appropriate trade the limited warranties

detailed in paragraph 7 below shall be voidable at the sole election of the Company. The Company offers onsite

training or service after installation of any products. All onsite training or onsite or off-site service provided to

you by the Company after installation of any purchased products shall be charged at the rate of $950.00 per day

for each Company representative together with all costs for travel, lodging and meals. All such costs shall be

paid in advance or at the discretion of the Company at the conclusion of such services.

7. LIMITED WARRANTY

All Company products including all component parts to guarantee proper functioning of the Company products

are deemed by the Company to be free of defects in workmanship and material for one (1) year from date of

Delivery of the product purchased. This warranty is limited to repairing or replacing products which a

manufacturer's investigation shows were defective at the time of installation by the Company. In the event of a

warranty claim, you will be responsible to pay installation expenses, but not parts costs.

The express warranty set forth herein is in lieu of all other warranties, express or implied, including, without

limitation, any warranties of merchantability or fitness for a particular purpose; all such warranties are hereby

disclaimed and excluded by the Company. Repair or replacement of defective products as provided above is the

sole and exclusive remedy provided hereunder and the Company will not be liable for any further loss,

damages, or expenses, including incidental or consequential damages, arising directly or indirectly from the

sale or use of this product.

USE OF OTHER THAN COMPANY PARTS VOIDS THIS WARRANTY

8. Disclaimer and Limitation of Liability

Our responsibility for defects relating to the products and services offered by us or available on our Site is

limited to the procedures described in our return policy set forth below. EXCEPT FOR THE TERMS OF THE

LIMITED WARRANTY SET FORTH IN SECTION 7 HEREOF, ALL PRODUCTS AND SERVICES

OFFERED BY US OR AVAILABLE ON THIS SITE ARE PROVIDED “AS IS” WITHOUT WARRANTY OF

ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THE

WARRANT OF NON-INFRINGEMENT. WITHOUT LIMITING THE FOREGOING, WE MAKE NO

WARRANTY THAT THE PRODUCTS AND SERVICES OFFERED BY US OR AVAILABLE ON THIS

iDRY Turbo User Manual

Содержание MINI












































Результаты поиска

Содержание MINI

Отзывы:

Бренды по названию

Популярные бренды

iDRY MINI, Руководство пользователя

Результаты поиска

Содержание MINI

Отзывы:

Бренды по названию

Популярные бренды