Idromatic Astra Steamer Hybrid, Инструкция по эксплуатации

Страница: 27 / 32

English
25
18. TROUBLESHOOTING
PROBLEMS WHILE USING STEAM
Meaning What to do
Water sensors
- Check the power cord and verify that the sensors are connected
properly.
- If problem persists see section 13.
- If problem persists call Assistance.
Flame failure
(burner error)
- See section 6g
- If problem persists see section 15 e 16
- If problem persists call Assistance
Boiler water shortage
- Check the power cord and verify that the sensors are connected
properly.
- If problem persists see section 13-14
- If problem persists call Assistance
Blinking
repeatedly
Water shortage
- Make sure the external water source is connected properly and
there is nothing blocking the water flow. Check the flow switch.
- Connect water mains directly to machines’ water inlet as the flow
switch may be blocked. The pressure from the water mains will
unblock the switch and eventually the water pump.
- If problem persists call Assistance
Overheating
Wait for 1 minute before shutting down the machine so that the
fan can cool down the boiler. Subsequently remove the cover as
described in 13b and restore the thermostat by pressing button 15
(fig.11).
If problem persists call Assistance
+
Overvoltage
Make sure that your local electric grid is compatible with the
machine’s characteristics (visible on the machine’s plaques and on
page 3).
+
The pump works for more
than 4 minutes
- Check the power cord and verify that the sensors are connected
properly.
- If problem persists see section 13-14
- If problem persists call Assistance
Smoke
Incomplete combustion/
wrong stoichiometric
parameters
- See section 7d
- If problem persists see section 15 e 16
- If problem persists call Assistance
Reduction of
flow intensity
Limescale problem
- See section 12
- If problem persists call Assistance
Steam
leakage from
outlet
couplings
Steam valves are obstructed
by limescale or sediments
- See section 12
- If problem persists call Assistance