Idromatic Astra Steamer Hybrid, Инструкция по эксплуатации

Страница: 21 / 32

English
19
12. MAINTENANCE FOR STEAM - DESCALING
Figure 09 Figure 10
Figure 11
a.
After the machine has cooled down to an acceptable temperature, connect the steam hose (see section
7b). Remove the placeholder screw 12 (fig.09) to remove the protective cover. Plug the machine into the
outlet.
b.
Empty the boiler by the drainage valve 8 (fig.02). Keep the trigger pulled (and the relative steam outlet
open) to vent the boiler.
c.
Fill an external container with approximately 20L of SALNET FOSS descaling product (cod.00.129) at 20%
concentration, then connect a hose with quick fitting that goes from the external container to the
machine’s water inlet.
d.
Unscrew the steam gun with a 19mm wrench after having lowered the protective rubber cover. Place the
hose in the external water container. This creates a closed circuit. Make sure that the relative steam
outlet is open, if not press the STEAM button 2 (fig.01) on the front panel.
13
14
15
12