background image

40

9 - MAINTENANCE

WARNING!

EVERY TIME THE MACHINE IS CLEANED OR MAINTAINED IT MUST FIRST BE STOPPED BY 

FOLLOWING THE STEPS DESCRIBED IN PARAGRAPH 8.4.

TO GUARANTEE MACHINE SAFETY, YOU ARE ADVISED TO USE ONLY SPARE PARTS AUTHORI-

ZED BY THE MANUFACTURER. DO NOT CARRY OUT TEMPORARY OR DANGEROUS REPAIRS.

CAUTION!

DURING OPERATION, THE SYSTEM MUST MAINTAIN A NOISE LEVEL THAT COMPLIES WITH 

LEGISLATION. FURTHERMORE, THERE MUST BE NO WATER LEAKAGE FROM THE PUMPING 

MODULE OR THE LINE.

9.1 MAINTENANCE
MACHINES contain a high pressure water supply, an electric motion system and a control 

system that need a big maintenance. Everything works, most of the time, in awful climatic 

conditions: bad weather, humidity, ice, hot, hard and non-stop usage and, not always 

adequate water, not always strained fuel.

The solution is preventing breakages. How to do it? 

Simply replacing the components before they cause breakages.

9.2  

CLEANING NOZZLES

Check every 50 hours the proper functioning of the nozzles of the crown group that could 

get clogged due to the formation of limestone or using unclean water.  A nozzle is clogged 

note because drips or has a spray angle is not uniform. 

To clean the nozzle follow the procedure:
- Disassemble the nozzle unscrewing the stainless steel body (1);
- Soak for 4 hours in a mixture, 80% distilled water 20% white vinegar, the components 

stainless steel body with o-ring (1), impeller plate (2), stainless steel spring with rubber 

ball seal (3), stainless steel adapter with o-ring (4);
- DO NOT soak the filter (5), but clean it with air or replace depending on its wear;
- Reassemble the nozzle.

When replacing the nozzles in the nozzles ring do not tighten with excessive force. Each 

contact tip stamped its own characteristics, flow and spray angle.

9.3  

CLEANING WATER INTAKE FILTER AND TANK

Locate the water inlet filter connected to the water intake pipe and place inside the tank 

and clean with sanitizing products.

Clean the tank that is located inside the rattan base, with sanitizing products.

GB

1

2

5

3

4

1

4

Cop

yright ©2017 Idr

obase Gr

oup

. All rights r

eserv

ed

.

Содержание AURORA



























Отзывы: