background image

 

 

Disclaimer

 

 
Please read all the contents of the manual carefully before using the products described in this 
manual to ensure the safe and effective use of the products. After reading, please keep this manual 
properly for the next time you use it. 
 
Not disassemble or tear the sealed bidding of the scanner on your own, otherwise our company shall 
not assume the responsibility of warranty or replacement of the scanner. 
 
The images in this manual are for reference only. If there are some pictures that Not match the actual 
product, please refer to the actual product. For the improvement and renewal of this product, our 
company reserves the right to modify the document at any time without notice. 
 
All information contained in this manual is protected by copyright, and our company reserves all rights. 
No unit or individual may, in any way or for any reason, extract or copy all or part of the contents of 
this document in any form without written permission. 
 
The products described in this manual may include the copyrighted software of our company or a 
third party. Unless authorized by the relevant rights holder, no unit or individual can copy, distribute, 
modify, extract, decompile, disassemble, decrypt, reverse engineer, rent, convert, Sub-license and 
other infringement of software copyright. 
 
Our company has the final right of interpretation of this statement.   

Содержание HP-1207WA-000R

































































Отзывы: