Service Manual NeuroLight / AlgiScan - Rev B
10
c. Battery change
1) Unscew the battery holder.
2) Replace the battery by putting the wires down while sliding them up.
3) Reposition the battery holder, being careful not to overtighten the screws.
4) Reconnect the battery and the jump and reassemble the unit.
d. Disassembling optical room
1) Unscrew the 6 screws on the optical room using a phillips screwdriver.
2) Disconnect connector K1
3) Remove the optical room
4) Clean the diffusing panel with a dusting spray
Diffusing panel
