Idmed Algiscan, Руководство пользователя

Страница: 36 / 40

User Manual AlgiScan 36
Stimulations
• Output current between 0 to 60 mA (ac/- 10% on an actual load of 4 K ohms),
single-phase, 100 Hz, Pulse width 200 microseconds.
100 Hz
200 µs
• Duration of stimulation 5 seconds maximum in TETANUS mode.
• Duration of stimulation between 1 and 8 seconds in PPI mode.
• Stimulation or ECG electrodes:
- Capable of supporting up to 300 volts with 60 mA current.
- Contact surface must be greater than 1.8cm².
Examples of recommended electrodes:
- RED DOT electrodes ref.2560 from the company 3M
- F9047 electrodes from the company FIAB
Please check with your authorized distributor or with the manufacturer which products are
available and approved in your country.
Light Stimulation
• Duration 1 second
• Intensity fixed at 320 Lux (pre/-10%)
Measurements management
• Folder creation by barcode reading
• Number of recordable measurements: approx. 10000
Power Supply
• 3,7V DC Lithium-Ion battery 2900 mAh or above (with in-built thermal and short-circuit
protection), autonomy approx. one week in normal use (20 measurements per day).
• IDMED STA-W2 charging base:
- Qi standards compliant 5W min
- AC adapter ref. PWR5_1, 5V / 1.3 A min. Compliant IEC60601-1
Input: 100-240V, 50-60 Hz, 160-80 mA
Output: 5V DC / 1400 mA
Weight
• 280 g (approx.)
Warranty
• Length of the warranty: 2 years (battery warranty: 6 months)