Idmed Algiscan, Руководство пользователя

Страница: 14 / 40

User Manual AlgiScan 14
Turning the device ON/OFF
The AlgiScan switches on automatically when the device is held in the hand
(movement detection).
Note: the device switches off automatically if it is not used for 2 minutes or if it is repositioned
on its charging station.
Patient Files / Measurements identification
The AlgiScan has a barcode reader. Activation of the red light beam for reading
barcodes identifying the patient is done by pressing and holding the dedicated button
and directing the light beam towards the barcode.
Scan window
 
When a label is read, it creates a file with the label encoded ID number or retrieves
an existing file created by a previous scan of that same label.
The AlgiScan has also 20 pre-set files numbered 1 to 20. If there is no barcode
scanning, the user will either choose one of those files or create additional files numbered 21
and above to save the measurement results.
Settings
Setting the time on the AlgiScan
The AlgiScan contains a clock that is set at the factory. The operator can update the
date and time of the AlgiScan. To access the time setting and date change menu proceed as
follows:
• Select the “settings” menu by pressing the following icon
Then select this icon : . Use the navigation arrows to adjust the “date”, the “time” and
“format” of the date as desired.
By pressing the “Home” button , the changes will be automatically validated.
Changing the language
If necessary, the operator can change the language of the AlgiScan. To access the
menu for changing the language, follow the procedure below:
• Select the “Settings” menu by pressing the following icon
Then use the navigation arrows to select the desired “language”.