VAC-5000HD User Guide
36
8.3.3 [C20 to C24] Setting forced HDMI output mode
In order to output signals, the VAC acquires EDID from the sink device to determine if the sink device is using
HDMI or DVI signals. If the sink device cannot do it for any reason, problems will occur (for example, audio
cannot be output). In such a case, use the forced HDMI mode to output signals.
Menu numbers
C20 to C24 :OUT1 to OUT5
Setting values
oFF
: Normal operation [Default]
Err
: Forced HDMI mode (Use this mode if an EDID acquisition error occurs).
ALL
: Always HDMI mode
Note:
If you use the Forced mode (“Err”), set the EDID resolution to the appropriate EDID other than
EXTRNAL EDID (“01”). Otherwise, the source device cannot acquire the EDID and the device
may not output correct video or audio.
8.3.4 [C30 to C34] Setting color conversion output manually
You can set the color space that will be sent to the sink device
The sink device automatically selects the appropriate color space according to the color space of the input
video. If the sink device cannot do it for any reason, you can select the color space manually.
Menu number
C30 to C34: OUT1 to OUT5
Setting values
rgb: RGB output
422: YCbCr422 output
444: YCbCr444 output
d: DVI output
oFF: Automatic [Default]
