VAC-5000HD User Guide
16
6 Precautions
Before connecting to external devices, follow the precautions below.
6.1 Installation
When installing the VAC, please observe the following precautions.
・
Do not block vent holes. To provide adequate ventilation, maintain sufficient clearances around the
VAC (1.2 in. (30 mm) or more).
・
When the VAC needs to be mounted in an EIA rack, or an enclosed space, ensure that sufficient
ventilation or cooling is provided and that the ambient temperature will not exceed 104°F (40°C). If
inadequately vented, the product’s service life, operation and reliability may be affected.
■
Attaching rack mounting brackets
1. Remove four M5 screws from one side of the unit. Retain these screws for step 2.
2. Attach one bracket to the side of the unit using the screws removed in step 1.
3. Repeat steps 1 and 2 on the other side of the unit.
Unit
M5 screws
M5 screws
[Fig 6.1] Attaching rack mounting brackets
Note:
The standard screw tightening torque is 2.94 N
･
m (about 30 kgf
･
cm).
