NJR-T01UHD/NJR-R01UHD Command Guide
9
3.2 LAN communication
The NJR-01UHD can be accessed and controlled through LAN communication.
Connecting a control device to the NJR-01UHD’s LAN connector enables system control and status queries
using the IP-NINJAR Configurator (configuration software for IP-NINJAR).
For operations from the IP-NINJAR Configurator, refer to the User Guide of IP-NINJAR Configurator.
Please contact us to download the IP-NINJAR Configurator.
Note:
When using LAN communication to control the NJR-01UHD, the terminal software cannot be used.
3.2.1 Setting up LAN communication
Follow the procedure below.
(1) Connect the control device to the LAN connector of the NJR-01UHD through a LAN cable.
(2) Start the IP-NINJAR Configurator in the control device.
(3) Send communication command from the Maintenance page of the IP-NINJAR Configurator.
(4) You can control the NJR-01UHD and get the status information using communication command.
EDID emulator
CPU
HDMI receiver
NJR-T01UHD
D/A conversion
A/D conversion
Audio D
*1
PC for control
HDM
I I
NP
UT
AUDI
O
INP
UT
HDMI transmitter
HDM
I O
UT
P
UT
AUDI
O
O
UT
PUT
TX
RS
-23
2C
LA
N
DIP switch
(No.1)
NJR-R01UHD
OFF
ON
Step(1)
LAN cable
Video/Audio D
*1
Video/Audio D
*1
Audio A
*2
RX
HDM
I O
UT
P
UT
AUDI
O
O
UT
PUT
CPU
RS
-23
2C
LA
N
DIP switch
(No.1)
OFF
ON
Step (2)
Step(3)
Communication
command
PCs can control both NJR-T01UHD and NJR-R01UHD by connecting to either NJR-T01UHD or NJR-R01UHD.
*
LAN connector
Audio A
*2
Audio D
*1
Video/Audio D
*1
HDMI transmitter
D/A conversion
Audio A
*2
or D
*1
Cable for
extension
NJR-T01UHD or NJR-R01UHD
*1
Audio D: Digital audio
*2
Audio A: Analog audio
[Fig. 3.3] Setting LAN communication
