NJR-T01UHD/NJR-R01UHD Command Guide
33
@GSP / @SSP
Speaker configuration (Cont’d)
Parameter
Getting commands : the number of speakers and which speakers will be used is
returned
Setting commands : if you do not specify the speaker configuration, the following
configuration will be applied depending on the set number of
speakers
number
speaker
0
1
2
3
4
5
6
7
8
9
10
1
OFF OFF ON
OFF OFF OFF OFF OFF OFF OFF OFF
2
ON
OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
3
ON
ON
OFF OFF OFF OFF OFF OFF OFF OFF OFF
4
ON
ON
ON
OFF OFF OFF OFF OFF OFF OFF OFF
5
ON
ON
OFF ON
OFF OFF OFF OFF OFF OFF OFF
6
ON
ON
ON
ON
OFF OFF OFF OFF OFF OFF OFF
7
ON
ON
ON
ON
ON
OFF OFF OFF OFF OFF OFF
8
ON
ON
ON
ON
OFF OFF ON
OFF OFF OFF OFF
The specified
number
and the total number of speakers do not match, the
number
is
set automatically based on the setting of speakers to be used. In case the
number
exceeds the settable range, an error is returned.
Example
@GSP,1,1,1
@GSP,1,1,1,6,0,1,2,3
Getting the speaker configuration of Channel 1
Six speakers are used:
Front Left/Right, Low Frequency Effect,
Front Center, Rear Left/Right
@SSP,1,1,1,8
@SSP,1,1,1,8
Assign eight speakers to Channel 1:
Front Left/Right, Low Frequency Effect,
Front Center, Rear Left/Right,
Rear Left/Right Center
Completed
@SSP,1,1,1,8,0,3,5,6,7
@ERR,1
Assign 10 speakers to Channel 1:
Front Left/Right, Rear Left/Right, Front Left/
Right Center, Rear Left/Right Center,
Front Left/Right Wide
The number of speakers exceeds the settable
value
Remarks
The NJR-R01UHD does not support this command.
