IDK NJR-T01UHD, Справочник по командам

Страница: 40 / 43

NJR-T01UHD/NJR-R01UHD Command Guide
40
@GSS I/O status (Cont’d)
Parameter *7 For status of the HDMI output connector, one of the codes below will be returned in
the following order: video output/audio output.
Error code Video output status Audio output status
0 Video is output correctly. Audio is output correctly.
1
－
“ @GAM / @SAM
Muting/unmuting digital audio
output
” is set to “ON”.
2 No source device is connected.
3 No video signal is input. No audio signal is input.
4 Video output or audio output of the source device is muted.
5 Signal with HDCP is input but the sink device does not support
HDCP.
6 The source device does not output the needed information
(packets) for outputting video or audio.
7 Signal that is not supported by
NJR-01UHD is input. Since compressed audio is
input, audio cannot be output.
9
－
The sink device that does not
support audio is connected.
B No sink device is connected.
C HDCP is being authenticated.
D HDCP authentication failed
Example @GSS,1,1,1,0
@GSS,1,1,1,0,H30,1920 x 1080p 60Hz,
LINEAR PCM 48kHz, HDCP 1.4 ON
Getting all input statuses of NJR-T01UHD
Channel 1
- Input signal type : 30-BIT COLOR
HDMI signal
- Video input signal : 1080P 60Hz
- Audio input signal : LPCM 48kHz
- HDCP
: 1.4
@GSS,2,1,1,10
@GSS,2,1,1,10,HDCP 1.4 SUPPORT,
H30,00
Getting all output statuses of
NJR-R01UHD Channel 1 outputs
- HDCP authentication : HDCP 1.4
- Output signal type : 30-BIT COLOR
HDMI
- Error code: Video and audio are output
correctly
Remarks
－