NJR-T01UHD/NJR-R01UHD Command Guide
35
4.5.2.6 Setting LAN
@GIP / @SIP
LAN
Function
Getting
Setting
Format
@GIP, device, ch, reserved
@SIP, device, ch, reserved, mode, ip,
mask, gateway
Return value
@GIP, device, ch, reserved, mode, ip,
mask, gateway
@SIP, device, ch, reserved, mode, ip,
mask, gateway
Parameter
device: Model
1 = NJR-T01UHD, 2 = NJR-R01UHD
ch: Channel
1 to 512 = Input channel 1 to Input channel 512
reserved: Reservation
“1” fixed
mode: Mode
0 = Automatic (DHCP) [Default], 1 = static
“0” is selected, the following three parameters will be invalid.
ip: IP address
0 to 255 = 8 bit (in decimal) x 4 combinations
[Default] Getting automatically
mask: Subnet mask
0 to 255 = 8 bit (in decimal) x 4 combinations
[Default] Getting automatically
gateway: Default gateway
0 to 255 = 8 bit (in decimal) x 4 combinations
[Default] Getting automatically
Example
@GIP,1,1,1
@GIP,1,1,1,1,192.168.3.2,255.255.255.
0,192.168.3.254
Getting the LAN setting of NJR-T01UHD
Channel 1
- Mode : Static
- IP address : 192.168.3.2
- Subnet mask : 255.255.255.0
- Default gateway : 192.168.3.254
@SIP,1,1,1,1,192.168.3.2,255.255.255.
0,192.168.3.254
@SIP,1,1,1,1,192.168.3.2,255.255.255.
0,192.168.3.254
Setting the LAN of NJR-T01UHD Channel
1 as follows:
- Mode : Static
- IP address : 192.168.3.2
- Subnet mask : 255.255.255.0
- Default gateway : 192.168.3.254
Completed
Remarks
This command can be input only via the NJR-CTB command server.
If the LAN setting is changed, the communication may be disabled.
Change the environmental settings based on the NJR settings.
