IDK MSD-702UHD Скачать руководство пользователя страница 28

Страница: 28 / 150

MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide

8.3 Menu operation

You can use the VFD screen and front panel keys to view and control settings.

Press the “MENU/SET” key to apply settings and to change the menu level.

Press the “ESC” key to go back to the previous screen.

Use the “

▲

” and “

▼

” keys to select channels and use the “

▲

” and “

▼

” keys to select the menu item.

In the setting screen, use “

▲

”, “

▼

”, “

▲

” and “

▼

” keys to move the cursor and select the setting The applied

values are saved automatically after the session .

【

See: 9.1 Menu list

】

Top screen

Main menu

Setting

Sub menu

“

MENU/SET

”

key

“

ESC

”

key

Operation

MSD-802UHD

[Fig. 8.5] Menu level

Tip:

The “MENU/SET” key LED is illuminated only for settable menu.

For some setting screens, the set value is applied from the “MENU/SET” key. When the “MENU/SET” key

flashes, press the key to apply the setting value. After the setting has been applied, the key will illuminate

without flashing.

We offer an optional cover for menu operation keys to prevent accidental key presses. Please contact us as

needed.

Note:

To avoid losing settings, do not interrupt power to the MSD while “NOW SAVING” is displayed; otherwise, the

setting information may be lost.

Содержание MSD-702UHD























































































































































Результаты поиска

Содержание MSD-702UHD

Отзывы:

Бренды по названию

Популярные бренды

IDK MSD-702UHD, Руководство пользователя

Результаты поиска

Содержание MSD-702UHD

Отзывы:

Бренды по названию

Популярные бренды