MSD-62 Series User’s Guide
82
9.7.7 Fixing settings for each input signal
Menu Top
→
INPUT SETTING
→
INPUT TABLE FIXED
Setting for Each input channel
Setting value
Setting mode:
・
SELECTED
: Sets for each item [Default]
・
ALL FIXED
: Does not load settings saved for each input signal but fixes the current settings
Individual setting (if “SELECTED” is selected for the setting mode):
・
ASPECT
: OFF [Default], ON(FIXED)
【
See: 9.4.3 Aspect ratio
・
ANALOG TYPE : OFF, ON(FIXED) [Default]
【
See: 9.7.3 Analog input signal parameters
・
AUDIO LEVEL : OFF, ON(FIXED) [Default]
【
The MSD continuously monitors the input signals. If a particular input signal that has been presented to the
MSD before is input again, the MSD will output the signal at the same size and quality as its previous use.
【
See: 9.2 Input signal automatic detection
You can select the setting saved for each signal or the current setting.
“ALL FIXED”: Does not load all settings saved for each input signal but outputs the video with the current
setting.
“SELECTED”: Aspect ratio, analog input signal type and audio input level can be set individually. For setting
items other than settings in “
[Table 9.1] Attributes saved for each input signal
”, settings saved for each
input signal are used.
“OFF”: Settings saved for each input signal are used to format the video output.
“ON (FIXED)”: Current settings are used to format the video output.
[Table 9.7] Individual settings for each digital or analog signal
Individual setting
Digital signal
(IN1 to IN8
*
)
Analog signal
(IN7 and IN8
*
)
ASPECT
Can be set
Can be set
ANALOG TYPE
Cannot be set
Can be set
AUDIO LEVEL
Can be set
Cannot be set
*IN7 and IN8: Digital and analog input signals can be accommodated.
For signal selection, see “
9.7.5 Selecting signal of DVI input connector
”.
