HDC-UHD Series User Guide
22
[Table 4.2] Rear panel features
#
Feature
Description
①
HDMI input connector
Input connector for HDMI and DVI signals to interface source
devices, such as Blu-ray player and PC.
②
HDBaseT input connector
Input connector for HDBaseT signal
Connects to a transmitter over a category cable.
【
See: 9.7.3 HDBaseT input long reach mode
③
HDMI output connectors
Output connectors for HDMI and DVI signals, interfaces sink
devices such as LC monitors and projectors.
④
HDBaseT output connectors Output connector for HDBaseT signal
Connects to a receiver over a category cable.
【
See: 9.8.5 HDBaseT output long reach mode
⑤
HDMI cable fixing holes
Retain HDMI cables by inserting cable clamps.
【
See: 6.3.2 Securing HDMI cable
⑥
HDBaseT LINK LED
Lights when an HDC series or HDBaseT supported product is
connected
Blinks every 0.5 seconds when the connected device is in standby
state. In standby state, LAN and RS-232C communication is still
available.
Does not light when no HDC series or HDBaseT supported
product is connected.
⑦
Analog audio output
connectors
3-pin captive screw analog audio output connector interfaces
amplifiers, speakers, and mixers.
【
See: 6.3.4 Connecting audio cable
⑧
LAN connector
For external control by communication commands or web
browsers
【
See: 6.3.5 Connecting RS-232C cable
⑨
RS-232C connector
3-pin captive screw connector for RS-232C serial control.
【
See: 6.3.5 Connecting RS-232C cable
⑩
Power supply connector
For use with supplied AC adapter.
⑪
Frame ground
For bonding chassis to local ground.
HDC-TR121UHD: An M3 screw is used.
HDC-TH221UHD, HDC-TH421UHD, HDC-RH221UHD, and
HDC-RH421UHD: An M4 screw is used.