HDC-TH401/201/101 User Guide
52
7.25 Setting how long video output requests of sink device are ignored
You can set the hot plug monitoring time.
This menu is available if “
” is set to “ON”.
Some DVI and HDMI devices detects hot plug signals for recognizing changes in connection. If a monitor that
including the no-signal input monitoring fuinction is connected, it takes some time to output video. Use this
menu to set the masking time of hot plug as needed.
[Fig. 7.9] Hot plug off mask setting
・
Setting by menu
Normal condition (OFF)
↓ SET button
“
－
” “
＋
” button
set Hot plug off mask setting → select C10
↓ SET button
“
－
” “
＋
” button set Hot plug off mask setting [Default: OFF]
OFF, 2 to 15: 2 sec. to 15 sec.
↓ SET button
After processing, 7-SEGMENT LED goes back to menu.
Monitor
requests video
output signal
（
ON
）
Preparing video output
Mask time
Video output stop
After preparation of video
output, output video image
Monitor
requests video
output signal
（
ON
）
Processing video output
Starting video output
