HDC-UHD Series Command Guide
47
@GHB
HDBaseT information (For each channel)
Getting
Command @GHB, port, mode
Response @GHB, port, mode, status_1 (, status_2, status_3, status_4, status_5, status_6)
Parameter
port : I/O channels
2 = IN2
102 to 105 = OUT2 to OUT5
mode : Target status (selected channels only)
0 = All statuses,
1 = Video signal information,
2 = Link status,
3 = Connection between source and sink devices
4 = Device type,
5 = Version ID,
6 = Connected device type, 7 = Connected version ID,
8 = Operation mode,
9 = Category cable length,
10 = Bit error rate,
11 = Video signal quality,
12 = Maximum video signal quality (FMSEERR MAX VALUE),
13 = Video signal residual gap (FMAXERR CURRENT VALUE),
14 = Maximum video signal residual gap (FMAXERR MAX VALUE)
status_1: Video signal information
Value
Description
1920x1080p 59.94Hz
Resolution, frequency
YCbCr 4:4:4
Color space
24 BIT COLOR
Color depth
NO SIGNAL
No signal is input.
status_2: Link status
Value
Description
LINK ON
Transmitter and receiver are connected.
LINK OFF
Not connected
status_3: Connection between source and sink devices
Value
Description
ON
Connected
OFF
Not connected
status_4: Device type
Value
Description
VS100RX
VS100RX
VS100TX
VS100TX